The definitive 50watt Marshall Combo, this amplifer is the vertical input model and consequently the most sought after model. A classic rock tone in a league of its own.

The 2-channel Markbass AC 601 Mark Acoustic is a solid-state bass combo amplifier that pumps out 250W of power at 8 ohms. Just because you're playing acoustic bass, doesn't mean you can't rock. The Mark Acoustic amplifier boasts a 6" B&C speaker with 1" HF compression driver with custom horn. Channel 1 offers a 3-band EQ, while Channel 2 has a 2-band EQ (low/high) plus Markbass' exclusive Variable Pre-shape Filter.

Adding to your sound choices are 4 reverb effects (Room, Reverb 1, Reverb 2, Hall), and 2 Chorus effects (Chorus 1, Chorus 2) with Gain and Effect Mix level controls. The I/O includes a front input that accepts either a balanced or unbalanced XLR, as well as Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables, a balanced XLR out, and an Insert point jack for adding external components into the preamp chain on the rear panel. Best of all, the Markbass AC 601 Mark Acoustic is an amplifier that doesn't just work with an acoustic bass or guitar, but with acoustic instruments like mandolins, violins, cellos, banjos, etc.

Solid state preamp and an analog power amp
6" B&C speaker
4 reverbs effects (Room, Reverb 1, Reverb 2, Hall)
2 chorus effects (Chorus 1, Chorus 2)
3-band EQ on channel 1
2-band EQ with Variable Pre-shape filter on Channel 2
Gain and Effect Mix level control on both channels
Line out, Master Control knobs
Input accepts both balanced XLR input or unbalanced
Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
Balanced XLR line out
Insert point for inserting external components into the amplifier chain
Ground lift switch to eliminate hum
High frequency compression driver level control on the left side
Works with all acoustic instruments including bass, guitar, mandolin, violin, cello, banjo, etc.
Handle on top for transportation
Dual-sided fiberglass PC boards with lined perforations for high-quality solder connections
Surface-mount components are silicon-sealed to isolate vibrations
Computer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operation
Integrated threaded posts for easy assembly/disassembly and added durability
Rigid 2mm thick aluminium chassis for a long-lasting finish

TRACE-ELLIOT TA40CR ACOUSTIC GUITAR AMP This amp is small and compact. It is in good working order and has a very clear sound. Size: 17 inches x 11 inches x 11 inches, weight 12.5 kilos. Ideal for small venues, pubs and acoustic gigs. Very portable with a great range of sounds.

Dedicated sweet-sounding Watson XA30, custom-made for semi-electric guitar to enhance and better define.

Because of the frequency range it can handle it also doubles up perfectly as KEYBOARD amp.

Excellent working order.

EDEN N11
This is a powerful kick back combo for small gigs and rehearsals. The N11 features a 150 Watt power rating putting it at the top of it's class. It has a seamless wide range input with an AGC controlled input stage featuring built in Auto compression, a total sound shaping Enhance control, coupled to a powerful three band active tone control. It comes equipped with an aux input, and a headphone out that automatically mutes the speaker output when you use the headphone jack, optimally tuned plywood Bass reflex enclosure and a powerful wide range Eden designed Coaxial 12" speaker for great punch and tone.

N11 SPECS
Power 150 Watts RMS @4ohms
Speakers 12"
Tweeter Mechanical
Power Handling 150W RMS
Freq. Response 42hz - 12khz 2dB
Impedance 4ohms
Dimensions 20.5"H x 18.5 "W x 13 "D
Weight 43 LBS

This is an original USA Model 1964 - This is an awesome sounding example of this iconic amplifier and a must have for any studio or serious collector.

1964-1967 Champ (Black Face Champ) Black forward facing w/ white labels Front Conrol Layout: In, In, Vol, Treb, Bass - Power Sw, Pilot Lamp Knobs: Black skirted w/ chrome center, numbered 1 - 10 Cabinet: ? Cab Covering: Black Tolex Cab Hardware: Black Strap handle, 3½" chassis straps, glides Grille: Silver sparkle grille cloth Logo: None (64-65) or Grille mounted, raised, chrome & black, script "Fender"(66-67) Weight: ? Speakers/Load: 1 x 8"/? ohms Speaker Model: Oxford 8EV Effects: None Output: 6 Watts Preamp: 12AX7 Power: 6V6GT Bias: Cathode Bias Rectifier: 5Y3GT Comments: The speaker jack and fuse (1A) are located under chassis.

Price includes transformer for use in the UK.

The perfect small size kick back bass amplifier for practice or warm-up. At 50 watts, this is the most powerful amp in its class. The EN10 features a wide range 10" Eden designed coaxial loudspeaker for great tone. It is housed in a strong light weight plywood enclosure. It contains a fully automatic AGC compression circuit on the input stage to help make every note sound well balanced. That is coupled to a smooth sounding old school passive 3 band tone control circuit. You can set the N10 up to sound sweet and clean or crank on plenty of crunch. A head phones out completes the package.

Classic 80s Bass amplifier with recently replaced 300 watt bass driver, features include a 12 band graphic eq, preshape and Laney's patented DPC circuit. A lot of amp for not a lot of money.

LIMITED PRODUCTION VHT PITTBULL SUPER THIRTY COMBO

The Special Edition PITTBULL SUPER THIRTY 1X12 combo features a quartet of Class A operated EL84 matched power tubes in a simple yet sophisticated power configuration that automatically adjusts the amount of speaker damping when changing channels.

Two independent channels deliver warm, sparkling clean tones and savory overdrive with separate tone controls for each, complemented by a fully tube driven three-spring Accutronics Reverb. Additional features include a Series/Parallel FX loop Line Out, footswitchable boost for each channel, and a 75-watt 12-inch special design PITTBULL P75E speaker.

Only 200 of this model where be produced by special arrangement with selected dealers. Footswitch included.

Looking for the quality of high-end amps, with the price of lower end equipment? The Workman Series was built specifically with you in mind, then. The Workman 15 has all the power your looking for, without all the price. Along with the features that come with every workman amp (solid-state preamp, active 3-band EQ, a custom SWR woofer, built-in Limiter and Aural Enhancer, a balanced XLR direct out, sidechain Effects Loop with Blend control, a tuner output, and stereo headphone jack); it also has 160 watts of power (200 with the extension speaker), a 15" driver, and a piezo tweeter. The price says, "low end," the quality says, "high end."

Perfect for small to medium size gigs. Best of all, the new model comes with built-in casters for easy tilt and roll convenience.

Marshall Lead 20 Amp Marshall combined advanced technology with a Celestion Speaker that has increased bass response to complement the electronics. This amp is very very loud for it’s size. Don’t even think about using the volume at more than 5 at home. You’ll go deaf and your neighbors won’t come visit you when you’re in hospital. And the sound is unmistakably Marshall. Only packed into a smaller package. This amp has a high & low channel. There are volume, treble, mid, and bass controls. headphone jack, and a direct line out that is very responsive hooked up to a mixer. Check this amp out in an internet search. It listed for $499. Buy it here and save. This is a like new amp. It was only used as a spare back-up. And we were quite impressed, particularly with the volume and how it sounded true to the Marshall sound. In great condition, particularly for an amp that’s over 25 years old. No issues, plays great. Please refer to the photos for verification of condition. Refer to the reviews pasted below for some 3rd party opinions: The tone is pretty aggressive for a smaller amp. The sound is that high pitched piercing drive that is kind of cool for some fat power chords. I play everything from shredding rock to warmer ballads. Depending on the player I can see many sounds coming from the 10" celestion. Crank the gain all the way to 10 and set the volume at 2 and you'll get a crunchy practice volume that won't shake the plaster loose. These were made to bring tone to the masses. They do. 9 is a high but fair rating. My Mesa Boogie DC-5 gets a 10. I have a Lead 20. I think it is far away a better amp than anything in its class you can buy today. This amp appears to be something of a trouble free variety. Kind of like an old transitor radio, just turn it on and go. I would think that this amp could double as a step ladder or a door stop with no discernable negative results from said usage. If you want to play beautiful clean tones this amp works perfect, but if you crank up the gain this amp will put out some of the hardest tones you have ever heard!! If you are concerned about great sound use this amp and mic. it on stage for the most you can get out of it!! Although this is just one speaker(Celestion which is the best the UK has to offer), you can get a lot of volume out of this mother!!! I just got done playing it with the volume only up to 5 and my wife is screaming. My ears are ringing. This little sucker is quite a surprise and the louder you turn it up the more it reacts like a pure tube amp. Very impressive!! Weighs 27 lbs. 17"h X 19"w X 10"d Lead 20, Amp, Amplifier